Thermo Scientific SOLA II Flare, User Manual

Page: 52 / 164

Chapter 5
Configuration
Thermo Scientific SOLA II Flare User Manual 5-4
Modbus Setup
1. The Modbus Setup menu enables to you set the baud rates, parity and
IDs for COM 3 and COM 4.
C o n f i g u r a t i o n
M o d b u s S e t u p
 
E n t E x i t
Figure 5-10.
2. Select one of the baud rates available for RS485 COM 3 (38400,
19200, 9600, 4800, 2400, or 1200 bps), or select Disable.
M o d b u s S e t u p
C O M 3 M o d b u s B a u d r a t e
 
E n t E x i t
Figure 5-11.
3. Set the parity for COM 3.
M o d b u s S e t u p
C O M 3 M o d b u s P a r i t y
 
E n t E x i t
Figure 5-12.
4. Set the ID (network address) for COM 3. The address can be from 1 to
255.
M o d b u s S e t u p
C O M 3 M o d b u s I D
 
E n t E x i t
Figure 5-13.
5. Set the baud rate and the ID for COM 4 in the same manner, using the
submenus for COM 4.