Thermo Scientific SL40 F, Instruction Manual

Page: 14 / 64

1
Introduction and Description
Directives, Standards and Guidelines
1-4 SL40 F / SL40 FR Thermo Scientific
Directives, Standards and Guidelines
Table 1-2. Directives, Standards and Guidelines
Tension /
Frequency Produced and inspected according to the following
standards and guidelines
230V 50/60Hz 2006/95/EC Low Voltage Directive:
2006/42/EC & 98/37/EC Machine Directive:
2004/108/EC EMC Directive
98/79/EC In-vitro-Diagnostika (IvD)
EN 61010-1, 2
nd
Edition
EN 61010-2-020, 2
nd
Edition
EN 61010-2-101
EN 61326-1
EN 61326-2-6
EN 55011B
EN 61000-6-2
EN ISO 13485
230V 60Hz
120V 60Hz
100V 60Hz
UL 61010-1, 2
nd
Edition
CAN/CSA-C22.2 No. 61010-1, 2
nd
Edition
IEC 61010-2-20, 2
nd
Edition
(Pollution degree 2, Overvoltage category II)
IEC 61010-2-101
Emitted interference FCC Part 15 CLASS A
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
100V 50Hz IEC 61010-1 2
nd
Edition
IEC 61010-2-020 2
nd
Edition
IEC 61010-2-101
EN 61326-1
EN 61326-2-6
EN 55011A
EN 61000-6-2
EN ISO 13485