1. If the unit is powered up, press the POWER key, this will power down
the unit.
2. Press and hold the TIMER HOURS/MINUTES key and the TEMP
ON/OFF key simultaneously for approximately 5 seconds. The unit
should enter model adjustment mode as indicated by the temperature
display reading either ‘rEF’ or ‘Inc’, depending upon model state.
3. Using the TEMP UP and TEMP DOWN keys, adjust the model type
to either ‘rEF’ or ‘Inc’ as desired.
4. Press the POWER key. This logs the model type to memory and
initializes the unit.
Note
It is not necessary to change models unless the firmware has been
updated or if model selection is accidentally changed in the menu.
MaxQ 6000 Shaker 5-9
Thermo Scientific
Section 5
Operation
Model Alteration
