Thermo Scientific SGD-O, User Manual

Page: 68 / 73

Commonly Used Parameter & Command DACs
E-2
SGD-O User Guide Thermo Fisher Scientific
Parameter Description DAC Notes
Enable protected memory
(DensityPRO)
013010
Enable protected memory
(LevelPRO)
005010
High voltage hold value 070003
Table E–2.
Common command DACs
Command Description DAC
Preload configuration for SGD-O oilfield in metric units 1014
Preload configuration for SGD-O oilfield in English units 1016
Hold input at value indicated by parameter 133003 137
Hold current output at 50% (12 mA for a 4–20 mA) 2
Hold current output at maximum (20 mA for 4–20 mA) 5
Hold current output at minimum (4 mA for 4–20 mA) 8
Clear all holds 9
Toggle status message 72
Reset without clearing data 81
Calibration command 80
Erase all entries except comm setup 82
Erase all entries 74
Clear protected data 159
Standardization command 103
Use latest calibration value 49