Thermo Scientific Orion Versa Star, Reference Manual

Page: 9 / 36

5
Thermo Scientific Orion VERSA STAR Conductivity/Temperature Module
Chapter 3 Setup Menus
Setup Menus for Primary Measurements
1. Select the Conductivity channel by pressing the channel key, then press
f3 (Setup)
.
2. Arrow over to highlight the appropriate conductivity module for setup, press f3 (Select) .
3. Arrow the cursor to Mode, press
f3 (Select)
, arrow to Conductivity, press
f3 (Select)
.
4. Select the options for your testing.
TDS, Salinity and Resistivity Setup Menus
Conductivity Setup Menu
(Default values are in bold in the table below)
Probe Serial Number Input
Sample ID Off , Manual, Auto Increment
Stability
Smart
, Fast, Medium, Slow
Averaging Off, Automatic Smart
Read Type AutoRead , Timed, Continuous
Cell K (Constant) Input cell constant
Reference Temperature 5, 10, 15, 20,or 25 ºC
Temp Compensation
Linear
, nLFn, nLFu, EP
Temperature Coefficient 2 .1
Alarm** Limit, CalDue, Set Point
** Limit and set point alarm default set to ‘off’.
Cal due alarm set to 12 hours.
TDS Setup Menu (Default values in bold)
Read Type
AutoRead
, Timed, Continuous
Cell K (Constant) Input cell constant
TDS Factor 0 .50
Reference Temperature 5, 10, 15, 20, or 25 ºC
Temp Compensation Linear , nLFn, nLFu, EP, Off
Probe Serial Number
Input
Stability Smart , Fast, Medium, Slow
Averaging Off, Automatic Smart
Alarm Limit, Set Point
Cell Type Standard , USP
Resistivity Setup Menu (Default values in bold)
Read Type AutoRead, Timed, Continuous
Cell K (Constant) Input cell constant
Reference Temperature 5, 10, 15, 20, or 25 ºC
Temp Compensation Linear, nLFn, nLFu, EP, Off
Stability Smart , Fast, Medium, Slow
Averaging Off, Automatic Smart
Alarm Limit, Set Point
Cell Type
Standard
, USP
Salinity Setup Menu (Default values in bold)
Read Type
AutoRead
, Timed, Continuous
Cell K (Constant) Input cell constant
Salinity Type Practical Salinity , Sea Water
Stability Smart , Fast, Medium, Slow
Averaging Off, Automatic Smart
Alarm Limit, Set Point
Cell Type Standard , USP