Orion Star A215 Benchtop pH/Conductivity Meters
3
Keypad
1. Press
to power the meter on. When the meter is on, press and quickly release
to turn the
backlight on or off or press and hold
for about three seconds to power the meter off.
2. Press
to exit any meter function and return to the measurement mode.
3. The
f1
,
f2
,
and
f3
function keys perform a variety of meter operations. The menu-specific operation is
shown above each key. For example, press
f1
in the measurement mode to start a calibration.
4. The
,
,
or
keys are used as navigation keys (up, right, down, left) when selecting from
a fixed list or grid of meter options. In the measurement mode, these keys are used to access the setup
menu, change the measurement mode, manually log or print a measurement and hold (freeze) a displayed
measurement.
5. Press
to turn on or off the stirrer probe (Cat. No. 096019).
6. Press
to access the calibration log and data log.
Press the f1, f2 and f3 function keys to perform the action shown above each key
on the display.
Press to turn the meter on.
When the meter is on, press and quickly release to turn the display backlight on or
off or hold down to turn the meter off.
In the measurement mode, press to take a measurement.
In the setup, calibration and other menus, press to escape the current menu and
return to the measurement mode.
In the measurement mode, press to enter the setup menu.
In the setup, calibration and other menus, press to scroll up through a list of options.
In the continuous measurement mode, press to freeze the displayed measurement and
press again to unfreeze the measurement.
In the setup, calibration and other menus, press to scroll left through a list of options.
In the single channel measurement modes, press to change the displayed measurement
mode. Options for channel 1 are pH, mV, RmV (relative mV), ORP and ISE. Options for
channel 2 are Cond (conductivity), TDS, Salinity and Res (resistivity).
In the setup, calibration and other menus, press to scroll right through a list of options.
In the measurement mode, press to log or print a measurement.
In the setup, calibration and other menus, press to scroll down through a list of options.
Press to view the data log and calibration log.
Press to start or stop the stirrer probe.
Keypad Display Information
