Chapter 3
|
Meter Setup Menus
a.
Press the f3 (edit) key to access the number entry screen.
b.
Press the
p
,
q
,
t
or
u
key to highlight a number, press the f3 (enter) key to select
the number and repeat until the desired password is shown at the top of the screen.
c.
Press the f2 (done) key to accept the password and exit the number entry screen.
10.
Press the f2 (accept) key to submit the new password for the new method.
11.
The meter will return to the methods list and the new method number will have the date,
time and mode shown in the methods list.
Editing or Deleting a Method
Use the edit function to modify the channel-specific measurement, calibration and alarm
settings of an existing protected method. Use the delete function to convert an existing
protected method to an open method.
1.
In the measurement mode, press the setup key.
2.
Press the
p
,
q
,
t
or
u
key to highlight pH Channel, pH/ISE Channel, COND Channel or
DO/RDO Channel and press the f3 (select) key.
3.
Press the
p
or
q
key to highlight Method and press the f3 (select) key to access the
methods list.
4.
Press the
p
or
q
key to highlight a protected method and press the f3 (options) key.
a.
Protected methods have the date, time and mode shown in the methods list.
5.
Use the popup number entry screen to enter the specific password for the selected method.
a.
Press the f3 (edit) key to access the number entry screen.
b.
Press the
p
,
q
,
t
or
u
key to highlight a number, press the f3 (enter) key to select
the number and repeat until the correct password is shown at the top of the screen.
c.
Press the f2 (done) key to accept the password and exit the number entry screen.
6.
Press the f2 (accept) key to submit the password for the selected method.
7.
Press the
p
or
q
key to highlight Edit or Delete and press the f2 (accept) key.
a.
If Edit is selected:
i.
Perform the appropriate actions to set the channel-specific measurement,
calibration and alarm settings within the selected method.
ii.
Once the required settings have been edited, press the f1 (back) key to return
to the methods list.
b.
If Delete is selected:
i.
Press the f2 (yes) key to confirm the deletion of the selected method.
ii.
The method will be deleted and the meter will automatically proceed to the
measurement mode.
Thermo Scientific
Orion Star A210 Series Benchtop Meter User Manual
|
27
Summary of Contents for Orion Star A210 Series
Page 5: ......
