Chapter 2
Merlin 2 - 9
Thermo Scientific
(Optional)
Once the external sensor cable is connected to the chiller,
enable or disable the sensor by pressing
a fifth time. The display
alternates with
and either
or
. If desired, use the arrow
keys to change the status and then press
to return to the temperature
display. See Chapter 3 for additional information.
To turn the chiller off, press
.
When the display goes blank it is safe to place the circuit protector located
on the rear of the chiller to the down position.
Using any other means to shut the chiller down can reduce the life
of the compressor.
The circuit protector located on the rear of the chiller is not intended
to be used as a disconnecting means.
Always turn the chiller off and disconnect it from its supply voltage
before moving it.
Stopping
External Sensor
CAUTION
CAUTION
CAUTION
Summary of Contents for Neslab Merlin M 75
