Thermo Scientific Jewett Blood Bank Refrigerators
Installation and Operation
6
INSTALLATION AND REMOVAL OF
DRAWERS
INSTALLATION
1.Place drawer on top of slides and push into rear stops.
2.Align slot in drawer slide with lock in tabs and press in place.
Lock in tabs must be fully engaged in slots, otherwise damage
may result to door pan.
REMOVAL
1.Press lock in tabs inward towards drawer slide.
2.Lift front of drawer up and pull clear of slides.
.
DRAWER SLIDE MOUNTING INSTRUCTIONS
1.Push into slots in rear standard as shown in Step # 1. Make
certain that the opposite drawer slides are in the same slots in the
opposite standards.
2.Push into slots in front standard and press down as shown in
Step # 2. If necessary, tap into place.
.
7
SHELVES (OPTIONAL)
Units for which optional shelves have been ordered come with
shelves pre-installed at the factory.
If you need to adjust or re-install shelves, follow the instructions
on the following insert page.
Note: Units with interior lights use two different kinds of shelf
clips: long clips on the right side and short clips on the left.
7
