Qubit
™
Flex Fluorometer User Guide
109
Safety, Electromagnetic compatibility (EMC), and Environmental
standards
This section provides information on:
•
U.S. and Canadian safety and EMC standards
•
European safety, EMC, and Environmental standards
•
Australian EMC standards
•
China RoHS Standards
U.S. and Canadian
Safety standards
The Qubit
™
Flex Fluorometer has been tested to and complies with standard:
UL 61010-1/CAN/CSA-C22.2 No. 61010-1, “Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use, Part 1: General
Requirements.”
UL 61010-2-081/CAN/CSA-C22.2 No. 61010-2-081, “Safety Requirements for
Electrical Equipment for Measurement, Control, and Laboratory Use, Part 2-081:
Particular Requirements for Automatic and Semi-Automatic Laboratory
Equipment for Analysis and Other Purposes.”
U.S. EMC standard
This instrument has been tested to and complies with standard 47 CFR FCC
Part 15 “Radio Frequency Devices”; Subpart B “Unintentional Radiators”.
Note:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Canadian EMC
standard
This instrument has been tested to and complies with standard ICES-001,
“Industrial, Scientific and Medical (ISM) Radio Frequency Generators.”
