Thermo Scientific invitrogen PowerEase Touch, User Manual

Page: 19 / 38

Add a step
1.
Touch Actions , then Add step (see Figure 9).
This will bring up the Constant Voltage , Constant Current , or Constant Power screen,
depending on the method type selected for the method (see Figure 5).
2.
Repeat for additional steps.
The step number will be displayed below the constant parameter value (see Figure 11). To view
adjacent steps when viewing the constant parameter screen, touch the left arrow (previous step) or
right arrow (next step).
3.
When all of the steps have been entered, touch Start run to initiate the run.
To previous step
To next step
Figure 11 Method step number location
Delete a step
1.
Navigate to the step to be deleted using the left and right arrows on the Constant parameter
screen (see Figure 11).
2.
Touch Actions , then Delete step .
Save a program
1.
Touch Actions , then Save As .
2.
Touch the name field in the Save As screen to bring up the keyboard, then enter the method name.
3.
Touch Enter , then touch Save .
Chapter 2
Methods
Manage methods
2
PowerEase ™ Touch 600W Power Supply User Guide
19