5.
Plug the power supply into an appropriate electrical outlet (use properly grounded AC outlets and
power cords).
6.
Connect the leads from the electrophoresis unit to the power supply by inserting the positive lead
(+) into the red output jack and the negative lead (-) into the black output jack.
7.
Turn the AC power switch at the back of the power supply On.
Programming options
The PowerEase
™
Touch 600W Power Supply can be programed to run single-step and multi-step
methods. Up to 100 user defined methods can be saved; up to 20 steps can be saved for each
multi-step method.
This power supply is also equipped with several pre-programed gel electrophoresis and transfer
methods. These methods include voltage and time parameters required to run and transfer many
pre-cast gel products from Thermo Fisher Scientific.
This power unit has a touch sensitive screen, so the selection of on-screen buttons and parameters is
accomplished by touching the screen at the location of the item to be selected.
Chapter 2
Methods
Programming options
2
10
PowerEase
™
Touch 600W Power Supply User Guide
Summary of Contents for invitrogen PowerEase Touch
Page 37: ......
