Thermo Scientific Invitrogen E-Gel A33811 User Manual Download Page 29

Page: 29 / 59

E-Gel

™

Power Snap Electrophoresis System User Guide

E-Gel

™

SizeSelect

™

II gels

E-Gel

™

SizeSelect

™

II 2% Agarose Gels are designed for use with the E-Gel

™

Power Snap Electrophoresis Device and

provide a fast and convenient method for DNA fragment library size selection as part of NGS library preparation
workflows.

Advantages

•

Target fragments are collected directly from a recovery well.

•

Contains highly-sensitive SYBR

™

Gold II nucleic acid stain that allows detection down to

0.5 ng/band of DNA.

General
guidelines

•

Load gel within 15 minutes of opening the pouch; run the gel immediately after loading.

•

Important!

Always wear Safe Imager

™

Viewing Glasses when viewing the gel with the filter

lid opened.

•

For guidance on disposal of used gels, see SYBR

™

Gold II DNA Stain (page 49).

Prepare samples

•

Prepare up to 25 μL of sample in 1X Sample Loading Buffer (e.g., use 2.5 μL of 10X Sample
Loading Buffer with 22.5 μL total sample).
10X Sample Loading Buffer is provided with E-Gel

™

SizeSelect

™

II Agarose Gels.

•

Use the indicated amount of DNA per well

for single or multiple bands.

•

Do not exceed 1 μg for sheared DNA.

•

Divide samples with higher amounts of DNA across multiple wells.

•

Use up to 25 μL total sample volume per well.

•

Dilute high salt samples (certain restriction enzyme and PCR buffers) 2- to 5-fold.

Gel type

Amount of DNA per well

Total loading

volume

Sample with single band

Sample with multiple bands

E-Gel

™

SizeSelect II

1-300 ng

500 ng

25 μL

Prepare gel

Remove

the gel from the package.

Gently

remove

the combs. Do not allow the

combs to bend or create suction in the
wells during removal.

Insert

gel cassette into the E-Gel

™

Power

Snap Electrophoresis Device, starting from
the right edge.

Press down on the left side of the cassette
to secure it into the device.

Summary of Contents for Invitrogen E-Gel A33811




























































Search results

Summary of Contents for Invitrogen E-Gel A33811

Reviews:

Related manuals for Invitrogen E-Gel A33811

Brands by name

Popular brands

Thermo Scientific Invitrogen E-Gel A33811, User Manual

Search results

Summary of Contents for Invitrogen E-Gel A33811

Reviews:

Related manuals for Invitrogen E-Gel A33811

Brands by name

Popular brands