iv
Thermo Scientific
Main cover
Warning
Do not open the cover, if the analyzer is in the
Running
or
Analyzing
state.
If the cover is opened when analysis is going on, tests under
processing are lost. Mechanical parts may move a few seconds after
opening the main cover. Refer to Operation Manual on how to stop
analyzer safely.
Cuvette waste bin
Warning
The cuvette waste bin and cuvettes are a potential source of toxicants
and irritating biological agents.
Treat the cuvette waste bin and used cuvettes as other dangerous
material in laboratory. Use protective gloves, spectacles and clothes
when working with the waste water container. The operator must be
cautious when working with the cuvette waste bin.
Waste water container
Warning
The waste water container is a potential source of toxicants and
irritating biological agents.
Treat the waste water container as other dangerous material in
laboratory. Use protective gloves, spectacles and clothes when
working with the waste water container. The operator must be
cautious when working with the waste water container.
Deionized water container
Information
Keep the deionized water container away from a potential source of
toxicants and irritating biological agents.
Use only as a deionized water container and clean as instructed. Do
not overfill the container, see the maximum water limit.
Summary of Contents for Gallery Plus
