2
Evolution One Series Spectrophotometers
Maintenance
26
Evolution One Series Spectrophotometer User Guide
Thermo Scientific
4. Replace the detector access cover.
5. Store the detector module in a secure, dust-free location.
To install the detector module
1. Turn off the spectrophotometer. See
.
2. Remove the detector access cover. See
3. Unplug the accessory detector cable if necessary.
4. Position the detector module so its thumbscrew faces left.
5. Line up the connector on the bottom of the detector module with the connector in the
detector compartment, and then press down on the module to secure the connection.
6. Tighten the thumbscrew by hand.
7. Replace the detector access cover.
Thumbscrew
Detector module
Thumbscrew
