Eutech EC 1720 Conductivity Meter 23
3.2.17 Sleep Mode
Set the sleep mode on or off. When the meter sleep mode
is on, the meter will enter sleep mode when no keys are
pressed for 20 minutes. Once the meter is in sleep mode,
press the “Power” key to resume using the meter. Make
sure sleep mode is off when taking timed measurements.
Press the
or
key to scroll through the Setup
Menu list until the Sleep Mode item is shown.
Press the
or
key to set the sleep mode.
Press the “Enter” key to save the change.
3.2.18 Clear Data
Erase all data logs or erase all calibration logs
Press the
or
key to scroll through the Setup
Menu list until the Clear Data item is shown.
Press the
or
key to select the data log (dAtA)
or calibration log (CAL) to be cleared.
Press the “Enter” key to confirm the selection.
Press the “Enter” key again to ensure the selected
log is not accidentally erased.
The meter will confirm when the selected log is fully
erased.
The meter will return to the measurement screen.
Summary of Contents for Eutech EC 1720
Page 2: ......
