iv
Thermo Scientific Cryofuge 8 / 16 Centrifuges and Heavy Duty Centrifuges
Table of Figures
Figure I–1: Centrifuge clearance, example with bar code scanner ................................... I–2
Figure I–2: Position of the bubble in the water level ........................................................ I–4
Figure I–3: Mains connection on the backside of the centrifuge ...................................... I–5
Figure III–1: Overview centrifuge and rotor, e.g. HAEMAFlex 12 ......................................III–2
Figure III–2: Align windshield knob and drive shaft .......................................................III–3
Figure III–3: Identify the circular marking, e.g. HAEMAFlex 8 and 12 .............................III–3
Figure III–4: Rotor locking tool ......................................................................................III–4
Figure III–5: Put the rotor locking tool ............................................................................III–4
Figure III–6: Tighten the rotor to the drive shaft .............................................................III–5
Figure III–7: Lubricate trunnion bolts, e.g. HAEMAFlex 12 ..............................................III–5
Figure III–8: Install buckets into rotor, e.g. HAEMAFlex 12 ..............................................III–6
Figure III–9: Correctly assembled round bucket (75003836/75003936, not 75003964) .III–6
Figure III–10: Correct Loading .......................................................................................III–7
Figure III–11: Incorrect Loading .....................................................................................III–7
Figure III–12: Insert windshield lid into holder ...............................................................III–8
Figure III–13: Select program ......................................................................................III–11
Figure III–14: Drain box (75007730) ...........................................................................III–13
Figure III–15: Installing the drain box (75007730) ........................................................III–13
Figure III–16: Remove the plug ...................................................................................III–13
Figure III–17: Remove the rotor from the drive shaft. ...................................................III–14
Figure IV–1: Cleaning rotor bolts and bucket bearing surfaces ...................................... IV–4
Figure V–1: Marking on windshield lid ...........................................................................V-1
Figure V–2: Position of the mechanical emergency door release......................................V-2
Figure V–3: Example for an error message .....................................................................V-3
