2 Safety considerations
50134805_03.2012
7
Thermo Scientific
2 Safety considerations
The device is compliant with the safety requirements of:
EN 61010
Low-voltage directive 73/23/EEC
EMC directive 89/336/EEC
For your own safety, you should observe the following safety warning signs.
The safety warnings indicate a possible source of danger.
At the same time they contain information on how correct action can avert danger. You
will always find warning signs attached to points of possible danger.
DANGER!
Magnetism.
Magnetic or metallic parts (e.g. data carriers, pacemakers, watches...)
can be affected by magnetic fields.
Keep such parts away from the magnetic stirrer (5) and the stirring
device (1).
DANGER!
Supply voltage and supply frequency must be within the range
specified for the power supply unit (3) or the control unit (9).
DANGER!
Defective secondary cables (4), power cables, or mains plugs must be
replaced only with original parts by the manufacturer or one of its
representatives.
Return the defective power supply unit (3) to our customer service for
repair.
DANGER
GLASS SPLINTER.
At high speeds of the mixing stick can lead to the destruction of the
sample vessels.
Wear safety goggles!
The vortex should not reach the stirring bar.
The stirring bar must rotate in the center of the sample vessel.
Watch the rotational behavior of the mixing stick for slow starts
CAUTION!
The equipment must not be operated in hazardous locations.
