Thermo Scientific Applied Biosystems GeneChip 645, User Manual, Page: 10 / 29

Chapter 1
The Hybridization Oven 645
Using the rotisserie
10
GeneChip
™ Hybridization Oven 645 User Guide
1
Using the rotisserie
Installing the
rotisserie into the
oven
Follow this procedure to install a rotisserie into the oven.
1.
Set the power switch off and open the oven door.
2.
Remove the rotisserie from the accessory box. Note that one end is equipped with
a rubber “foot” (Figure 2) . The other end is equipped with a gear (Figure 5) .
3.
Place the rotisserie into the oven with the rubber mounted shaft end on the left
(Figure 4) .
4.
Insert the shaft into the holder. Line up the left side of the shaft with the pivot
point, then push the rotisserie to the left against the spring. Press the rotisserie
axle into the receptacle with sufficient force to displace the socket ( Figure 3 and
Figure 4 ).
Figure 2 Detail of the left rotisserie axle, rubber foot.
Figure 3
Detail of the spring-loaded socket.