Antaris EX-IP Specifications
Weight and mounting
These instruments may be installed as wall mount or floor mount units.
Shelf, table and cart installations are available as well. No anchoring
hardware is provided by Thermo Fisher Scientific. Use the following
information to work with your structural engineer to obtain appropriate
anchors.
Weight
Model
Metric
English
Antaris EX-IP
139 kg
305 lb
Floor stand/cart
35 kg
75 lb
Wall mounting
Each system must be mounted to a structural member capable of
supporting four times the weight of the instrument. See the section entitled
“Lifting or moving” in the “Safety” chapter earlier in this manual for
lifting/moving precautions.
All 6 bolts are required to safely secure the instrument to the wall.
The instrument must be accurately secured within 2 degrees of vertical.
The wall must be perpendicular to the floor within 2 degrees with respect
to horizontal.
Bolt characteristic
Specification
Shear force
4715 N (1060 lb)
Tensile force
2800 N (630 lb)
Pull-out force
2800N (630 lbs)
Material
high quality steel recommended
Size
10 mm (3/8 in)
Thermo Fisher Scientific
Antaris EX Safety, Installation, and Site Preparation Guide
99
