Thermo Fisher Scientific
Antaris EX Safety, Installation, and Site Preparation Guide
95
Antaris EX-IP Specifications
Worldwide
regulatory
compliance
All Antaris EX instruments comply with domestic and international safety
regulations and applicable product standards. The table that follows lists
the regulations and product standards that apply for IP models.
Classifications, regulations and product standards
UL61010-1 (2004) Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 1: General requirements (Installation category II)
(Pollution degree 2)
EN61010-1 (2001) Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 1: General requirements. (Installation category II)
(Pollution degree 2)
CAN/CSA-C22.2 NO. 61010-1 (2004) Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 1: General requirements (Installation
category II) (Pollution degree 2)
89/336/EEC (1989) Electromagnetic compatibility directive
2004/108/EC (2004) Revised electromagnetic compatibility directive
73/23/EEC (1973) Low voltage directive
EN60825-1 (2002) Safety of laser products - Part 1: Equipment classification,
requirements and user's guide
EN 61326 (2003) Electrical equipment for measurement, control and laboratory use -
EMC requirements (Class A limits)
US 47 CFR Part 15 Radio frequency devices (Class A Digital Device)
US 21CFR1040.10 Performance standards for light-emitting products - Laser products
EN60825-1 (2002) Safety of laser products - Part 1: Equipment classification,
requirements and user's guide
IEC 60529 (2001) Degrees of protection provided by enclosures (IP65)
