3
Specifying the TCP/IP Settings and the BCD Board Location
Specifying the TCP/IP Settings
14
Agilent 1100 Series Getting Connected Guide for LC Devices
Thermo Scientific
5. Type the serial number of the Bin Pump or Quat Pump in the Module Serial Number
box (
).
Figure 10.
General page of the Agilent 1100 Binary Pump dialog box
6. Click
OK
.
7. Click
Done
to close the Xcalibur Instrument Configuration window.
8. Open the Xcalibur data system before you turn on the devices of your Agilent 100 Series
LC stack.
