Please
read
the
manual
carefully
and
follow
the
following
safety
guidelines
before
operating
this
instrument.
1. Keep this manual for reference.
2. Professionals
are
required
to
operate
the
instrument.
3. The instrument can only be used with
the original power adapter.
4. When
operating
the
instrument, the
operator must choose to
wear
appropriate
clothing
to
avoid
toxic
and
harmful
solvents
produced
as
follows:
◆
Harmful
liquids
splashed
◆
The
harmful
solids
ejected
◆
Body, hair, clothing
is
rolled
or
corroded
5. If the instrument becomes abnormal
or higher vibration in use, please immediately
reduce the speed accordingly, If the
instrument becomes abnormal or
there is a higher vibration when in use,
immediately reduce the speed accordingly
or immediately stop the instrument
but turning off the power.
6. Ensure that the accessories and
containers are installed correctly.
7. Check that the instrument and the
accessories are in good condition
before each operation.
8. For a single test tube mixing, please
put test tube in the middle hole of the
rubber platform. For multi-test tube
mixing, please always place the test
tubes in the center and symmetrically.
9. Be
careful
of
the
risks
that
may
arise.
◆
Flammable
substances
◆
Fragile
substances
10. Unplug
the
power
before
installing
the
accessories.
11. Carefully handle the instrument to
avoid any collision or impact.
Section 6 Safety Tips and Maintenance
Cleaning
In
order
to
ensure
the
safe
use
of
the
instrument, please
follow
the
manufacturer’s
recommendations
when
cleaning
the
instrument.
●
Unplug
the
power
first
when
cleaning.
●
Wipe
the
instrument
with
a
damp, soft
cloth or
non-corrosive
cleaning
agent
●
Direct spray
instruments are
prohibited.
●
Make
sure
that
the
instrument
is
completely
dry
before
operating
it.
●
Please
wear
gloves
when
cleaning.
Warning: Avoid dripping detergent or
water into the inside of the instrument
during cleaning.
Clean Spill
I
f accidental spillage of liquids caused by
mishandling or contained breakage occurs
on the surface of the instrument, please
shut down the instrument and clean up
the liquid immediately. If the liquid has
already spilled into the unit, cut off the
power supply first and immediately clean
up the liquid at the surface of the instrument.
Place the instrument in a ventilated and
dry environment for 24 hours before reuse.
If the instrument is not functioning after
drying for 24 hours, please contact the
manufacturer.
Warning:
The operator is not permitted
to gain access using a tool, to a part
which in normal use may be hazardous
live.
11 Section 6 | Safety Tips and maintence
Basic Vortex Mixer 12
