Thermo Scientific 3051 Series, Operating Manual And Parts List

Page: 13 / 30

3-2 Precision Standard Oven Thermo Scientific
Section 3
Installation
To prepare the oven for operation, perform the following procedures:
1. Install the shelf.
2. Verify all packing material has been removed from oven chamber.
3. Connect the line cord to an appropriate electrical outlet.
4. The oven is now ready for operation. No preliminary adjustments are
required.
Caution See data plate on oven for voltage, current and line frequency
specifications. Check that the power requirements of the oven will not
overload the circuit.
s
Note The oven received a single point calibration at 120° C ± 2°C at the
factory. If greater accuracy is required the user may require a standard
laboratory calibration (see Calibration section).
s
The 3051 Series ovens feature a front panel mounted power
switch which is a combination power switch and circuit breaker,
eliminating the need for separate fusing. The circuit breaker will
interrupt power in the event of an oven heater malfunction.
Press the I (upper) half of the rocker-type power switch to turn
the oven On. Press the 0 (lower) half to turn Off oven power. To
reset the breaker, first place the switch to the Off position, then
return it to the On position.
Preparing the Oven
Power Switch
On
Off