Thermo Pride OL20FA151T60 Series, Installation And Operation Manual

Page: 3 / 26

i
I. SAFETY SECTION
This page contains various warnings and cautions found throughout the Oil Furnace
Manual. Please read and comply with the statements below.
c
WARNING: This furnace is not to be used for temporary heating of buildings or structures
under construction. See Page 1.
c
CAUTION: Do not exceed 90° rotation of the flue elbow counter clockwise right from the
vertical positon. See Page 2.
c
WARNING:
The predetermined fan and limit locations on all of the Thermo Pride oil fired
furnaces have been tested and approved by Thermo Products, LLC. in conjunction with
Underwriters Laboratories, Inc. Any attempt to relocate these safety controls or replace these
safety controls with a control that is not approved, or is incompatible, may result in personal
injury, substantial property damage or death. See Page 9.
c
WARNING: The heat exchanger must be cleaned by a qualified service person See Page 9.
c
CAUTION: DO NOT ATTEMPT TO MAKE REPAIRS YOURSELF! See Page 8.
c
WARNING: The area around the furnace should be kept free and clear of combustible
liquids and material, especially papers and rags. See Page 8.
c
WARNING: NEVER burn garbage or refuse in your furnace. Never try to ignite oil by
tossing burning papers or other material into your furnace. See Page 8.
c
WARNING: Thermo Products oil furnaces are designed to burn No. 1 or No. 2 distillate
fuel oil or B5 distillate fuel oil. NEVER USE GASOLINE OR A MIXTURE OF OIL AND
GASOLINE. See Page 9.
c
CAUTION: DO NOT ATTEMPT TO START THE BURNER WHEN:
1. Excess oil has accumulated,
2. The furnace is full of vapors
3. The combustion chamber is very hot.
IF ONE OR MORE OF THESE CONDITIONS EXIST, CONTACT A QUALIFIED
SERVICE PERSON. See Page 9.