Thermo orion 135A, Instruction Manual

Page: 29 / 56

Note
Printing
measured
values
print
Printing
memory
RCL
+
print
Note
Printing
GLPdoc
t
report
cal
+
print
Models 135A and 136S Portable Conductivity Meters
Operation 23
Printing Measured Values and GLPdoc
t
Report
Make sure that the printer function is activated in the con-
figuration (Print On) and the set baud rate corresponds to
that of the printer.
Press the
print
key while in the measuring mode to print
out the currently measured value. The measured value is
printed out together with temperature, date and time and a
three-digit identification number. The identification number
is reset when the meter is switched off.
Press the
RCL
and then
print
keys to print out the logged
data. All stored data points are printed out with tempera-
ture, date and memory location number (Sxx).
If you only want to print individual data points, press the
RCL
key first. Then select the desired data point using the
Y
or
B
key and confirm with the
print
key.
If the permissible measurement or temperature range is
exceeded during data logging or if the clock has not been
set, the line on the print-out will be marked with “ # ”.
If temperature compensation was active during data log-
ging, the line on the print-out will be marked with “ ! ”.
To print out the GLPdoc
t
report, press the
cal
and then
print
keys. The report print-out contains:
❏
a calibration record with the data of the last calibration
❏
the settings of the configuration menu
❏
a record of the last self-test performed