Thermo orion 135A, Instruction Manual

Page: 24 / 56

Data log
STO
clock
STO
meas
Data logging
modes
Operation 18
Data Log
The data log records up to 100 measured values together
with temperature, time and date. Data storage is per-
formed either manually (at the press of a key), interval or
event-controlled. The data log always stores the currently
measured parameter (conductivtiy, salinity or TDS).
Press the
STO
key to access the memory mode and then
the
clock
key to access the data log mode. Now choose
between three different logging modes and the parameter
setting of the data logger using the
Y
or
B
keys.
Pressing the
STO
key confirms the selected mode. In the
Continue and Start mode this also activates the data log.
The current data memory location is shown on the display.
If “Clear” has been selected, all memory locations are
cleared and the meter returns to the measuring mode.
Pressing the
meas
key ends the data log mode.
After pressing the
STO
key, logging is continued after the
memory location in which the last measured value was
stored (continue). Press the
meas
key to end logging.
After pressing the
STO
key, the entire data log memory is
cleared without starting the data log (clear).
After pressing the
STO
key, the entire data log memory is
cleared. Storage begins from memory location “00” (start).
Press the
meas
key to end logging.