Unit Operation
50
Clearing Alarm Codes
After the alarm situation is resolved, press the ENTER Key to
clear the alarm code currently being shown. When all alarms
have been cleared the display will show all zeros to indicate
that no alarm codes exist.
Figure 38: ENTER Key
The display will return to the Standard Display about 30
seconds after all alarms have been cleared.
Figure 39: Standard Display
Important Alarm Notes
•
All alarms must be viewed before any of the alarms can be
cleared.
•
If an alarm will not clear, it may still exist. If the alarm is
not corrected, it will not clear or may be immediately set
again.
•
Some alarms cannot be cleared using the Standard Truck
HMI Control Panel. These alarms must be cleared by
maintenance personnel from the Maintenance or Guarded
Access Menus.