Unit Operation
35
UP ARROW Key
When the unit is turned on and the Standard Display is shown, pressing the UP ARROW Key will
increase the setpoint.
Secondary Use - When alarms are being displayed, pressing this key will scroll thru the alarms (if
more than one alarm is present).
Secondary Use - While holding ON Key down with the unit turned on, pressing this key will increase
the display brightness (Low, Medium, High).
DOWN ARROW Key
When the unit is turned on and the Standard Display is shown, pressing the DOWN ARROW Key will
decrease the setpoint.
Secondary Use - While holding ON Key down with the unit turned on, pressing this key will decrease
the display brightness (High, Medium, Low).
ENTER Key
If the setpoint has been changed using the UP ARROW Key and/or DOWN ARROW Key, pressing
the ENTER Key enters the setpoint into the base controllers memory.
Secondary Use - When alarms are being displayed, pressing this key will clear the alarm shown on
the display.
Secondary Use - When the unit is turned on, press and hold this key for 5 seconds to send a Start of
Trip (SOT) to the data logger.