15
ENGLISH
Adjustment of heating setpoint
- Press the key“+” or “-” to display the current value of the
heating temperature setpoint.
°C
- Increase or decrease the setpoint according to the type
of system by using the key “+” of “-”.
- To save the modification made and go back to the initial
screen, wait for 3 seconds or press the key “ENTER/
RESET”.
- Check that the thermal unit starts the ignition phase and
that the display shows the icon blinking (ambient
heating request) and the icon
.
- The thermal unit ignition phase will start only after the
light oil pre-heating phase will be completed and will
remain active until the set temperature will be reached.
Enable/disable the heating function
- Press the keys “+” and “-” simultaneously for a few sec-
onds;
- The icon and the current heating mode (ON or OFF)
will blink on the display;
- Press the keys “+” and “–” to select the required mode;
- Press the key “ENTER/RESET” or wait for 3 seconds to
save the modification made and go back to the initial
screen.
Adjustment of domestic setpoint
- Press the key "
▲
" o "
▼
" to display the current value of
domestic setpoint.
°C
- Increase or decrease the setpoint by using the key “
▲
"
o "
▼
".
- To save the modification made and go back to the initial
screen, press the key “ENTER/RESET”.
Enable/disable the domestic function
- Press the keys "
▲
" and "
▼
" simultaneously for a few
seconds;
- The icon and the current domestic mode (ON or
OFF) will blink on the display;
- Press the keys "
▲
" and "
▼
" to select the required mode;
- To save the modification made and go back to the initial
screen, press the key “ENTER/RESET”.
Summary of Contents for ACQUAHOME 25 B BLU
Page 1: ...ACQUAHOME 25 B BLU USER MANUAL...
Page 19: ...19 ENGLISH...
