THERMEx WASTEMINATOR II, Mounting Instruction

Page: 66 / 74

THERMEX
WASTEMINATOR
M 780672000203022015
66
EN
GL
IS
H
»
IN
STA
LL
AT
IO
N
INSTALLATION
Before installing the Wasteminator II thoroughly clean all surfaces.
NOTE: Remember to always use the supplied seals when installing the Wasteminator II, since
the system otherwise risks leaking.
INSTALLATION OF DRAIN PIPE ON THE WASTEMINATOR II
At first the drain pipe is attached to the Wasteminator II This is done in the following steps:
Attach the flange and the rubber seal to
the drain pipe.
NOTE: The rubber seal must be turned cor-
rectly, otherwise the system may leak.
Slide the drain pipe into the Wastemina-
tor II. Screw the drain onto the Wasteminator II,
using the screws and 4 mm Allen key.
3
1
2
4