THERMEx METZ MAXI II STRIP, Mounting Instruction

Page: 63 / 64

M 423193261225082016
THERMEX METZ MAXI II STRIP
63
ELECTRICAL INSTALLATION
MOVABLE MOTOR
A hood with a movable motor must be connected to the electrical grid using the attached Schuko plug.
NOTE: The hood must be grounded.
EXTERNAL MOTOR
When installing a hood with an external motor it is important NOT to use common zero when installing hood and motor, as this will affect functioning.
NOTE: The hood and motor must be grounded.
Take out the motor and turn it, so the outlet
is coming out the side of the motor housing. Attach the motor to the motor housing. Install the flange on the motor housing.
5
6
4
Cut the marked out hole in the side of the
condenser housing.
NOTE: The peace that are cut out of the
condenser housing can with advantage be
placed in the hole in the cover of the housing.
7
Place the motor housing in the condenser
housing.
8
x4
x4
ENG
LISH
»
E
LE
CT
R
IC
A
L I
NS
TA
LL
A
TIO
N