THERMEx METZ MAXI II STRIP, Mounting Instruction

Page: 62 / 64

THERMEX METZ MAXI II STRIP
M 423193261225082016
62
REVERSIBLE EXHAUST OUTLET
ENG
LISH
»
INS
TALL
ATION
7
To install the hood, follow the instructions in the section corresponding to the type of installation you have chosen.
Pull the other end of the extension cable
through the cover of the condenser housing
and the other flange. Connect the extension cord to the socket on
the motor.
Mount the flange on the motor with the inclu-
ded bolts and nuts.
9
10
Place the cover on the condenser housing. Place the included strips around the condenser
housing.
Place the motor in the desired location, and
pull the cable and vent from the
hood to the motor.
NOTE: When installing a vent on the motor,
the vent side must be mounted on
the flange with the non-return valve.
12
13
11
8
x8
Remove the motor housing from the conden-
ser housing. Remove the flange on the side of the motor.
NOTE: Pay attention to the nuts on the inner
side of the motor housing. Remove the motor from the motor housing.
2
3
1
x4
x4