B R520192152007012020
THERMEX 31
EN
GL
SIH
»
REMO
TE C
ONTR
OL
This is done in the following steps:
•
Ensure that the remote control is ready for use and the batteries are correctly inserted.
•
Switch off the mains power to the hood (it is not enough for the light and extraction on the
hood are turned off).
•
Reconnect the power to the hood.
•
Activate one of the functions on the remote control. This must be done within 8 seconds of
the power being reconnected to the hood.
•
If coupling is done correctly, the remote control will start to control the hood's functions.
•
If the coupling fails, start the process again.
•
EXTRACTION
The motor is activated by pressing on 'on/off extraction'. The motor always starts at speed 1.
The motor speed is increased by pressing on the (+) button and reduced by pressing on the (-)
button. If extraction has been set to the highest level, and the (+) button is then pressed, two
beeps will sound from the hood to indicate that the extraction level cannot go any higher.
Similarly, two beeps will sound from the hood if the (-) button is pressed when the hood is set
to its lowest level.
The motor is turned off by pressing on on/off extraction, regardless of which speed it is
running at.
LIGHT
The light on the hood is turned on and off by pressing on the 'on/off light' button. This can be
done independently of whether the motor is running.
Summary of Contents for FJERNBETJENING
Page 2: ......
Page 34: ...THERMEX B R520192152007012020 34 ...
