
7.
When the water tank is full, the “Full Water” indicator will light on for
alarm, the compressor will stop for self-protection
Drainage
While the water tank is full, the compressor will stop for self-protection and
the water full indicator will turn red.
To move the water tank, pull it out squarely from the unit.
After empting the water tank, place the water tank into space. Make sure it is
properly positioned, in order for the 'water full' sign to go out and your
dehumidifier is operating.
Please note, in case, the water tank has not been positioned well, the water
full indicator will turn red.
Continuous drainage
When the dehumidifier is operated at very high humidity levels, the water
tank will require more frequent drainage. In this situation, it may be more
convenient to set the unit up for continuous drainage with the following
procedures:
1.
Connect the spout for
continuous drainage with water
tube of inner diameter: 11 mm.
* Please note, the water tube is
not supplied with the unit.
2.
Ensure the water will always
drain away freely and the tube
will remain in right place.
Note! In very cold weather
conditions, precautions should
be
taken to prevent the water
tube from freeing.
Water tube of
inner diameter
11 mm
Spout for
continuous
drainage