1.
Power indicator
2.
ON/OFF (power) button
3.
“Full Water” indicator
4.
Humidity setting button
5.
Working mode indicator
(continuous working,
humidity 40%, 50%, 60%,
70%)
6.
Timer operation indicator
7.
Timer button
Operation
Steps:
1.
Plug the unit into a correct mains socket. (refer to the rating label at the
rear of the unit for correct voltage/frequency.)
2.
Press ON/OFF button to turn on the unit. The power indicator will light
on and the compressor will start to work.
3.
Press humidity setting button to set the working model need:
continuous working, humidity 40%/ 50%/ 60%/ 70%. The relative
indicator will light on.
4.
Press TIMER button to set the operating hour need (
1, 2, 4, 8H up to 15H)
and the chosen indicators will be light on
.
When the set time has been
reached, the compressor will stop working automatically.
5.
To turn off the unit, press ON/OFF button again.
6.
Pre-setting function
By pressing TIMER button but without turning on
the other functions (including ON/OFF button), you can PRE-SET the
time for the machine to work. For example, if you press the timer to 2H,
the unit will work automatically after 2 hours.