M 527230061212112015
THERMEX
ASTON
69
ENG
LISH
»
IN
STA
LL
AT
IO
N
INSTALLATION
The Aston is available with an internal motor. The range hood can either vent exhaust out into
the open air or re-circulate the air.
Follow the instructions in this guide the way in which you wish to install the exhaust outlet.
INSTALLING THE HOOD
The hood is installed on the wall using the following steps:
Measure out and mark the two "keyho-
les" on the wall.
Drill the holes into the wall using a
suitable drill for the type of wall.
2
x2
1
x2
Ensure that the rawlplugs and screws are
suitable for the wall material in question
and insert them into the pre-drilled holes.
NOTE: The screws must not be screwed in
further than the hood can be installed.
4
x2
x2
3
