THERMEX
ASTON
M 527230061212112015
74
INSTALLING THE DUCT WHEN THE HOOD IS TO BE USED FOR RECIRCULATION
If the hood is going to be used for recirculation, the cover panel must be installed up to the
ceiling to cover the duct.
The duct is therefore installed as follows:
ENG
LISH
»
IN
STA
LL
AT
IO
N
Measure the placement of the bracket
and mark the position of the holes on the
wall.
NOTE: The bracket must be positioned so
that it matches the holes in the duct.
Pre-drill the holes and insert the
rawlplugs.
Screw the bracket and cover panel onto
the wall.
1
Place the duct on the hood.
NOTE: Fasten the duct in the dint at the
top of the range hood.
2
x2
x2
x2
3
4
