THERMEx Antares HM 24, Installation And User Manual

Page: 8 / 12

Figure 12
Figure 13
8
Thermex Antares Room Sealed Conventional Combi Boiler Installation and User’s Manual - ENG
The room thermostat can
be connected to the main
board by removing the
bridge shown in Figure 12
and connecting the cables
of the room thermostat
to these terminals. This
connection is suitable for
both simple type and digital
type room thermostats.
To use a room thermostat
capable of controlling all
functions of the boiler
including domestic hot
water production, contact
with your authorised
service agency. Such room
thermostats may provide
internet connection and
remote access may be
made. If required, you
may control the appliance
through a computer or
smart phones and tablets
that provide required
features.
The appliance informs certain failures and warnings to the user through the LCD display, Figure 13. In such
case, if the error does not disappear after performing the indicated action the closest authorised service
must be called to fix the error of the appliance.
ELECTRIC SCHEME AND ROOM THERMOSTAT
ERROR CODES
13
14
DESCRIPTION OF THE ERROR ERROR CODE REQUIRED ACTION
No fire warning E01 RESET the boiler
Flue gas sensor warning E02 RESET the boiler
Central heating water sensor warning E03 RESET the boiler
Domestic hot water sensor warning E04 RESET the boiler
Fan warning - hall signal E05 RESET the boiler
Flue gas sensor over temperature warning E06 RESET the boiler
Low water pressure warning E08 Check water pressure
Safety thermostat warning E09 RESET the boiler
High water pressure warning - Only at Min. Power E10 Check water pressure
Processor Eeprom fault E13 Switch off and then Switch on the boiler
Central heating water return sensor warning E24 RESET the boiler
Room thermostat
connection