background image

Before starting the boiler ensure electric, gas and 

water connections are properly made and the 

appliance is supplied with correct power as stated 

in the data plate.

a. 

Open power supply connection.

b. 

Turn gas cock to open position.

c. 

Push on button ( 

off

 

). 

Figure 1

d. 

Select Summer/Winter mode. ( 

Mode

 

Figure 1

WARNING: In summer mode the boiler does not 

start unless a hot water tap is opened.
e. 

Start the boiler by adjusting to your desired 

temperature through temperature adjustment 

buttons. (When the temperature adjustment 

button is used  the temperature adjustment 

is flashes on the display and temperature 

adjustment changes with 1°C steps . When you 

have adjusted the desired temperature the LED 

display returns to the previous status after 5 

seconds.)

WARNING: When the boiler is first started the 

boiler may show ignition failures and go into block 

several times till the air in the gas supply line is 

evacuated. In that case push 

 ( 

Reset

 )

 

button 

and wait for 3 seconds to restart the boiler.

Summer/Winter mode selection;
When it is not required to use Central Heating mode 

of the boiler, the appliance may be turned to Summer 

mode sole to produce Domestic Hot Water. In order 

to set Summer mode push ( 

Mode

 

) button.

WARNING: As the mode button also functions 

as “on-off” button if pushed longer the boiler is 

switched off. When the boiler is off pump blocking 

safety is active, anti-freezing protection is not active.
a. 

When the appliance is in Summer mode the 

display shows (      ) sign. To set this mode; 

the button with ( 

Mode

 

) sign may be pressed 

to make desired selection. To set hot water 

temperature you may use (       ) (+/-) buttons to 

set the desired temperature.

  In Summer mode pump anti blocking safety and 

anti-frost protection are active.

b.

  When the appliance is in Winter mode the display 

shows (     ) and (        ) signs. To set this mode; 

the button with ( 

Mode

 

) sign may be pressed to 

make desired selection.

c.

  To set Central Heating temperature you may use 

(         ) (+/-) buttons to set the desired temperature.

  For domestic hot water temperature adjustment 

with (       ) (+/-) buttons you may set the desired 

temperature.

  In Winter mode pump anti blocking safety and 

anti-frost protection are active.

d.

 When the boiler is set to “only Heating” mode 

the display shows (       ) sign. To set this mode 

the button with ( 

Mode

 

) sign may be pressed to 

make desired selection. To set Central Heating 

temperature you may use (       ) (+/-) buttons to 

set the desired temperature.

  In Only Heating mode pump anti blocking safety 

and anti-frost protection are active.

WARNING: When the boiler switches on after a 

heat demand (when the burner is on), (      ) sign 

is show in the display.

Filling water is supplied through the filling valve 

located in the bottom of the boiler,

 Figure 3

. When 

the boiler is cold the installation should be filled such 

that the manometer located in the front of the boiler, 

(Figure 2)

 indicates a water pressure between 1-1,5 

SWITCHING ON THE BOILER

4

FILLING THE BOILER

6

4

Thermex Antares Room Sealed Conventional Combi Boiler Installation and User’s Manual - ENG

DAILY OPERATION OF 
THE BOILER

5

Figure 1

Burner Burning Symbol

DHW Symbol
Multiple Function Indicator

CH Symbol

Central Heating Flow

Temperature Adjustment Button

Reset Button

Mode Button

DHW Temperature

Adjustment Button

Digital

Display

Manometer

Summary of Contents for Antares HM 24













Reviews: