4.) ASSEMBLY
The oven will arrive pre-assembled; however, some assembly may be
required prior to start-up.
NOTE: These ovens are heavy and care should be taken to use lifting
devices which are sufficiently rated for these loads. Doors, handles and knobs
are not adequate for lifting or stabilization. The unit should be completely
restrained to prevent tipping during lifting and transport.
For larger ovens some parts such as doors, door tracks, car bottom
tracks, elevator lifts, blower motors, and conveyors may have been disassembled
from the oven to accommodate shipping. Before proceeding with installation,
review all of drawings and diagrams included in this manual.
1.
Refer to designs, making sure all oven stands, control boxes,
terminal boxes, doors, etc., are in place and secure. If not, locate
the appropriate parts that are included in the shipment and follow
the oven design drawings in order to complete the assembly.
2.
Locate the thermocouple hole and carefully pull out the alignment
pin. Carefully slide thermocouple into the hole, do not force.
If any questions arise concerning assembly of the oven, please contact
Thermcraft, Inc. at 336-784-4800.
