* Never stand in front of an open hot oven.
* Wear protective eyewear.
* Wear protective gloves.
WARNING:
Do not use combustible gases directly in this oven. Process
gasses must always be contained in a separate tube.
Modification of equipment for use other than that for which it is explicitly designed
for could cause severe injury or death. Any customer after market retrofit violates
the warranty.
Do not modify or disconnect any safety features provided. Disconnection of the
units safety features could allow the unit to become overheated and start on fire,
causing personal injury or death, product and property damage.
Periodically disconnect power from the equipment and allow it to cool completely. Once
cool, inspect for loose or broken heaters and for worn wire coils on the inside of the heated
chamber. Heaters may have to be replaced if damage is severe. Avoid contact with any
exposed heater coils / elements. Do not touch elements with bare hands or oily gloves. Contact
Thermcraft, Inc. if unsure of the safety of the heating elements in the conditions you have
observed.
Only qualified electrical professionals should remove the upper and lower terminal covers
of the terminal boxes. Keep all guards (guide-tabs, backstops, upper and lower terminal covers)
provided with the equipment in place while the oven is in operation. Observe all safety labels.
If questions arise concerning the operation of your oven, contact Thermcraft, Inc. at (336) 784-
4800, fax at (336) 784-0634 or email at
.
