Thermasol MTC Series Installation Manual Download Page 11

Page: 11 / 12

THERMASOL.COM

800.776.0711

Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details.

Steamhead Installation Instructions

81193_NC 4/16

When finalizing installation, install the steamhead into the
housing, making sure that the aromatherapy fill channels

are facing upwards.

To ensure that no moisture gets behind the steamhead and
into the wall, place a generous bead of waterproof silicone
around the steamhead, using the machined groove
(located on the back of the steamhead) as a guide.

Be sure there isn’t any debris within the housing, and that
the two O-rings are in place on the steamhead.

Press the steamhead into the housing until the steamhead
is tight against the finished wall. You may need to wipe
away any excess silicone.

Make sure aromatherapy
fill channels face up

Place silicone around
this groove

O-rings

This edge must be flush
with finished wall (+/- 1/8")

Finished wall

.63"

Contemporary

.63"

Traditional

3.5"

3.75"

.63"

Modern

Regency

Steamhead Installation

Summary of Contents for MTC Series













Search results

Summary of Contents for MTC Series

Reviews:

Related manuals for MTC Series

Brands by name

Popular brands

Thermasol MTC Series, Installation Manual

Search results

Summary of Contents for MTC Series

Reviews:

Related manuals for MTC Series

Brands by name

Popular brands