2
Dear Customer
Thank you for purchasing KAPPA cast iron solid fuel boiler. This instruction manual is intended to help you
install and operate the product safely, properly and economically. Please read this manual carefully before
installation and operation of your product, and keep it during the whole operation life. Do not touch or
interfere any part of the product other than those allowed. The installation, maintenance and service of this
boiler requires skilled technicians. For the installation of the boiler and proper room selection, installation of
water circuit, chimney design, this manual and mandatory regulations must be considered.
Carry out maintenance and cleaning work recommended on your heating system at regular intervals.
Details can be found later in the instruction manual. By doing this, you will not only be ensuring the
operational reliability of your heating system but also its efficient and low-emission operation.
Manufacturer’s Declaration of Conformity (EC)
We, BOYSIS MAKINE TAAHHUT SANAYI VE TICARET A.S,
located at Şerifali Mahallesi Hüsrev Sokak No.2, Erişkenler Plaza Kat 3, 34775
Ümraniye/İstanbul/Turkey, certify under our sole responsibility that the equipment specified below
has been designed, manufactured, and inspected by the relevant provisions of the Pressure
Equipment Directive 2014/68/EU and carried out final control as required by the relevant provisions
of the Pressure Equipment Directive 2014/68/EU
The item of equipment identified below has been subject to Conformity Based On Full Quality
Assurance (Module H of the Pressure Equipment Directive) by Controltest Ltd. (Notified Body
Number 2413),
Address of Notified Body: 12 Asen Yordanov Blvd. 1592 Sofia / Bulgaria
Certificate Number / Date: 0018 / 21.06.2017
DESCRIPTION OF EQUIPMENT: Hand stocked cast iron sectional boilers for solid fuels
MODEL/TYPE : KP3 / KP4 / KP5 / KP6 / KP7 / KP8 / KP9 / KP10
DIRECTIVES: Pressure Equipment Directive 2014/68/EU
STANDARDS: EN 303/5
Signed on 3
rd
, July 2017 by
BOYSIS Inc.
