It is extremely important to make sure the product is not immediately overheated and the
temperature is increased gradually, initially using low power. This will prevent damaging the ceramic
or serpentine tiles, the welds and the steel structure.
DO NOT EXPECT HEATING EFFICIENCY IMMEDIATELY!!!
OPENING/CLOSING THE DOOR
ATTENTION!
The door must be closed properly for the stove to work correctly.
"Use suitable Personal Protective Equipment (e.g. gloves) to open the stove door.
To open the door, lift the hook, as shown in the figure"
SETTINGS TO BE CARRIED OUT BEFORE THE INITIAL START-UP
Once the power cable is connected in the rear part of the stove, turn the switch, also placed at the
rear, to position (I). To switch the stove on or off press key 1 on the control panel.
Door hook is hanged at the back of
the stove
