- 18 -
- 19 -
2-7 Wiring Remote Controller
1. Number of controllers
One, two or three remote controllers can be installed as optional extras.
2. Remote Controller locations
The remote controllers allow the water temperature to be set from the various
locations where they are installed at kitchen, laundry, bathroom and ensuite.
3. Connection of cable to the thermann unit
(1)
Remove the front cover from the unit.
(2)Install the cable to the Thermann main unit using conduit or by concealing the
cables in the wall cavity.
(3)
Install the cable into the cabinet through the conduit in accordance with the table in
next page.
(4)
Based on “How to fix the cables”, attach the cable to the plate adjacent to the
terminal block, using the cable clamp provided.
(5)
Attach the cables to the terminals for the remote controllers.
(6)
Replace the front cover of the water heater.
