Thermaltake VI1000BNS, User Manual

Page: 11 / 16

9
8
Each motherboard has different standoff layout. It is highly
suggested that you refer to your motherboard's manual when
installing motherboard into the Case. The cases are applicable with
Standard ATX, Micro ATX motherboards.
Your motherboard may require a special I/O Panel, which should be
included with your motherboard.
Placement Direction:
When installing the motherboard, make sure you follow the direction
provided by your motherboard manufacturer. On most standard
motherboards, the edge with external ports goes to the rear part of the
chassis. It is highly recommended that you install CPU, heat sink and
modular components before fixing the motherboard inside the chassis.
3.1 Motherboard Installation
= the locations of
the screw holes. Note
these locations and
place included
standoffs on the chassis
first.
This side towards
the rear of the
chassis
Above illustration is a sample of what
the motherboard's layout. For more
detail screw hole placement, please
refer to your motherboard manual.
Chapter3 Motherboard & Leads Installation Chapter3 Motherboard & Leads Installation
3 3
4 4
Press the inner side of the clip and
pull to the right side to lock the
Graphic Card as shown.
Installation complete.
inner side
Take off the PCI bracket as shown. Locate Graphic Card to the
motherboard through fixing it
on the space of PCI bracket.
2.6 PCI slot usage
1 1 2 2