950-0075-revD
Page 8 of 15
9 May 2007
4. Attach window-lock bracket to window sash with one of the #8 x
3/4 slotted wood screws to secure window in place.
5. Plug into a grounded 3 prong outlet.
6. Press PESET on the power supply cord.
__________________________________________________________________________________________________________________
AIR CONDITIONER USE
Operating your air-conditioner properly helps you obtain the
best possible results.
This section explains proper air conditioner operation
IMPORTANT
:
If you turn the air conditioner off, wait at least 3 minutes before
turning it back on. This prevents the air conditioner from blowing
a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the cooling mode when
outside temperature is below 65º F (18ºC). The inside evaporator coil
will freeze up, and the air conditioner will not operate properly.
NOTE
: in the event of a power failure, your air conditioner will
operate at the previous settings when power is restored.
Starting Your Air Conditioner-Digital Control
NOTES:
When the air conditioner is off, the display shows the
current room temperature.
If the room temperature is below 55ºF (13ºC), the display
will show 55ºF (13ºC). If the room temperature is above
99ºF (37ºC), the display will show 99ºF (37ºC). The display
operation ranges from 64 to 86 ºF.
1. Press POWER to turn on the air conditioner.
Note:
When the air conditioner is turned on for the first time after it
is plugged in, it will display the default settings: Cool mode, Turbo
fan speed, 72ºF (22ºC) for 3 seconds. When it is turned on at all
other times, it will default to the previous settings.
2. Select mode. See “Mode”.
3. Select fan speed. See “Fan Speed”
4. Set temperature. See “Temperature”.
______________________________________________________
MODE
______________________________________________________
1. Press MODE until you see the indicator light come on for the
setting you desire.
2.
Choose Cool, Fan Only or Power Saver.
Cool
– Cools room. You can adjust temperature by
pressing the plus or minus button. You can select fan
speed by pressing Fan Speed.
Fan Only
– Only the fan will run. You can select the fan
speed by pressing Fan Speed, but you can not adjust the
temperature control setting. The display shows the current
room
temperature.
NOTE
: Auto fan speed cannot be selected in Fan Only
mode.
Power Saver
– The fan and compressor run when cooling
is needed. When this feature is selected, the fan will turn
off when the temperature is satisfied. The fan and
compressor will operate only as required to satisfy the set
temperature.
Compressor restarts in 3 minutes after the unit stops.
Compressor will not stop running for the first 6 minutes
after restarting unless unit is turned off.
NOTE
: After 3 seconds, display will show the current room
temperature.
_______________________________________________________
FAN SPEED
_______________________________________________________
1. Press FAN SPEED until you see the indicator light come on for the
setting you desire.
2. Choose Turbo, High, Low, or Auto
3. In the Auto setting, the fan speed automatically adjusts depending
on the room temperature.
_______________________________________________________
FILTER RESET
_____________________________________________________
1.
When FILTER indicator light is lit or flashing, remove, clean and
replaces the air filter. See “Changing the Air Filter”.
2.
Replace air filter.
3.
Press and hold FILTER after replacing the air filter.
