950-0075-revD
Page 3 of 15
9 May 2007
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock, or injury when using your air conditioner, follow these basic precautions:
SAVE THESE INSTRUCTIONS
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
IMPORTANT:
Observe all governing codes and ordinances.
Read and follow the instructions provided with the tools listed
Check the location where air conditioner will be installed. Proper
Here.
Installation
is
your
responsibility.
Make
sure
you
have
everything
necessary
for
correct
installation.
Tools Needed
The location should provide:
•
Flat-Blade and
Phillips
screwdrivers
•
Tape measure
•
Level
•
Drill and 3/32” or
smaller bit
•
Scissors
•
Utility Knife
Parts Supplied (on some models)
Check that all parts are included in the parts package.
•
Grounded electrical outlet within 4 ft (122 cm) of
where the power cord exits the air conditioner.
NOTE: Do not use an extension cord.
•
Free movement of air in room to be cooled
•
A large enough opening for the air conditioner
NOTE: Cabinet louvers must not be obstructed. Air must
be able to pass freely through the cabinet louvers.
•
Plug into a grounded 3 prong outlet.
•
Do not remove ground prong
•
Do not use an adapter.
•
Do not use an extension cord
•
Unplug air conditioner before servicing
•
Use two or more people to move and
install air conditioner.
