HELIOS SERIES USER MANUAL
27
10-1 Cleaning the Germanium Lens
Do not use corrosive chemicals on the optical glass components. The germanium
window surface is coated with anti-reflection coating. Dust, grease, and
fingerprints will produce harmful substances and lead to a decline in performance,
or cause scratches. If dirt is found, please use the following methods:
1.
Use a blown balloon or a soft brush to clean the lens surface to avoid dust
particles scratching the anti-reflection film on lens surface during the
wiping process.
2. Use a soft cotton cloth or lens wiping paper and dip in alcohol or lens wiping
liquid. Gently wipe the lens surface from the middle to the edge, paying
attention to not crack the lens, or use too much wiping liquid. If the lens is
still not clean, replace the cloth and repeat operation.
10-2 Disinfecting the Camera Surface
Do not use corrosive cleaning solutions on the optical glass components. Do
not get the electronics wet.
It is recommended to disinfect the camera surface
regularly with a non-corrosive sanitizing product. Follow the directions provided
by the manufacturer of the cleaning solution. Adhere to the sanitation protocols
and cleaning schedule set forth by the employer.
10-3 Device Calibration
It is recommended to have device(s) re-calibrated annually. Contact customer
service to schedule maintenance.
10.
Maintenance
10-4 Storage
When the equipment is not in use, the device should be placed in a dust-free
and moisture-free environment with a stable temperature and humidity.
DO NOT USE CORROSIVE CLEANING SOLUTIONS ON THE OPTICAL GLASS COMPONENTS.
DISINFECT THE CAMERA SURFACE REGULARLY WITH A NON-CORROSIVE SANITIZING
PRODUCT.
CALIBRATE YOUR DEVICES ANNUALLY. CONTACT CUSTOMER SERVICE TO SCHEDULE
MAINTENANCE.
